Change of evaporation rate of single monocomponent droplet with temperature using time-resolved phase rainbow refractometry

Droplet evaporation characterization, although of great significance, is still challenging. The recently developed phase rainbow refractometry (PRR) is proposed as an approach to measuring the droplet temperature, size as well as evaporation rate simultaneously, and is applied to a single flowing n-heptane droplet produced by a droplet-on-demand generator. The changes of droplet temperature and evaporation rate after a transient spark heating are reflected in the time-resolved PRR image. Results show that droplet evaporation rate increases with temperature, from ?1.28$\times {10}^{?8}$ m²/s at atmospheric 293 K to a range of (?1.5, ?8)$\times {10}^{?8}$ m²/s when heated to (294, 315) K, agreeing well with the Maxwell and Stefan–Fuchs model predictions. Uncertainty analysis suggests that the main source is the indeterminate gradient inside droplet, resulting in an underestimation of droplet temperature and evaporation rate. With the demonstration on simultaneous measurements of droplet refractive index as well as droplet transient and local evaporation rate in this work, PRR is a promising tool to investigate single droplet evaporation in real engine conditions.     

Investigation of hypersonic nozzle flow uniformity using NO fluorescence

Planar laser-induced fluorescence visualisation is used to investigate nonuniformities in the flow of a hypersonic conical nozzle. Possible causes for the nonuniformity are outlined and investigated, and the problem is shown to be due to a small step at the nozzle throat. Entrainment of cold boundary layer gas is postulated as the cause of the signal nonuniformity. PACS 47.80.Jk, 47.40.Ki, 47.60.+i     

FTIR光谱遥测红外药剂的燃烧温度

本文利用遥感FTIR光谱，对红外药剂的燃烧特性进行了研究。在分辨率为4cm^-1时，收集4700－740cm^-1波段的光谱。从HF等燃烧产物发射的分子振转基带精细结构的谱线强度分布，可以对燃烧温度进行遥感测定，并给出了燃烧温度随时间的变化关系，实验结果表明燃烧表面附近温度梯度很大，存在着急剧的变化温度场，同时也说明，在不干扰火焰温度场的情况下，利用遥感FTIR光谱对剧烈的、非稳态快速燃烧的火焰温度进行连续实时的遥感测量，是一种快速、准确、灵敏度高的测温方法，显示了它在燃烧温度测量、产物浓度测试以及燃烧机理研究等方面的应用前景。     

吸收式光纤温度传感器的研究

提出了一种利用半导体光吸收谱随温度变化原理设计的半导体吸收式光纤温度传感器.该传感器用GaAs晶片作为温度敏感元件，以光纤作为传光介质，发光二极管作为光源，光电管作为光电转换器件.利用双光束补偿原理,消除了由于光源不稳定产生的干扰.研制出的光纤传感器具有体积小，结构简单，抗电磁干扰，灵敏度高等优点.实验表明:该传感器在－20℃~85℃温度范围内可以达到0.1℃的准确度，可以实现强电磁干扰下的高空飞行器内环境温度的测量.为进一步实现光传飞控系统中的温度测控奠定了基础.     

Characterization of a 4-miktoarm star copolymer of the (PS-b-PI)3 PS type by temperature gradient interaction chromatography

Temperature gradient interaction chromatography (TGIC) was applied for the separation of a complex miktoarm star copolymer which has one polystyrene (PS) arm and three polystyrene-b-polyisoprene (PS-b-PI) diblock copolymer arms. Such miktoarm star polymers are much more difficult to characterize than branched homopolymers since the byproduct, typically polymers with missing arm(s) or coupled products, have not only different molecular weights but also different compositions. TGIC was able to fully separate the byproducts, and the composition of the molecular species corresponding to the different separated elution peaks was determined by two methods, fractionation/NMR and multiple detection (UV and RI). A reasonable agreement between the results of the two methods was obtained. By using the composition found, the corresponding molecular weights were determined by multi-angle light scattering detection. Based on the composition and the molecular weight we were able to identify the structure of the different molecular species.     

Nonextensive Statistical Mechanics Application to Vibrational Dynamics of Protein Folding

The vibrational dynamics of protein folding is analyzed in the framework of Tsallis statistics. We employ exact expressions for classical harmonic oscillators by considering the unnormalized constraints. As q→1, we show that these approximations agree with the result of Gaussian network model.     

A nucleophilic substitution reaction in microemulsions based on either an alcohol ethoxylate or a sugar surfactant

A nucleophilic substitution reaction between 4-tert-butylbenzyl bromide and a series of iodide salts has been performed in oil-in-water microemulsions based on either a fatty alcohol ethoxylate or a sugar surfactant. The reaction kinetics was compared with the kinetics of the same reaction performed in a microhomogeneous reaction medium, d-MeOH. Previous results showing a particularly high reactivity in the microemulsion based on the fatty alcohol ethoxylate was confirmed. It was shown that in both microemulsions the reaction rate was almost independent of the choice of counterion to iodide. This indicates that complexation of the cation with the surfactant headgroup, which, in particular, could have taken place with surfactants containing oligooxyethylene chains (a “crown ether effect”), seems not to be of importance.

¹²⁷I NMR studies, as well as quadrupole splitting experiments performed by ²H NMR, indicate that there is a certain accumulation of iodide at the oil–water interface of the microemulsions. It is difficult to draw any quantitative conclusions in this respect, however.

The results obtained in this study, combined with results from previous investigations of the same reaction, indicate that the unexpectedly high reactivity obtained in the microemulsion based on a surfactant containing an oligooxyethylene headgroup is most probably due to the nucleophile being poorly solvated when present in the headgroup layer of such a microemulsion. Poorly solvated anions are known to be highly reactive nucleophiles.     

Effect of core-shell micelle formation on the redox properties of phenothiazine-labeled poly(ethyl glycidy ether)-block-poly(ethylene oxide)

Redox properties of phenothiazine-labeled poly(ethyl glycidy ether)-block-poly(ethylene oxide) (PT-EGE_n-b-EO_m) are reversibly changed by core-shell micelle formation. In the temperature range higher than the critical micellization temperature (cmt), the anodic potential of PT group positively shifts and concomitantly its anodic current decrease, or levels off compared to those of the reference polymer PT-EO_m without the thermo-responsive EGE_n segment. The former alteration is caused by incorporation of hydrophobic PT groups into a core of the micelle and the latter by the decrease in the diffusion coefficient of PT groups due to formation of the core-shell micelles. The cmt value and the temperature-dependent alteration in the redox properties strongly depend on the polymer structure, especially the length of thermo-responsive EGE_n segment. The electrochemically determined hydrodynamic radii of the polymer aggregates seem to be overestimated, compared to the values reported for the aggregates of other thermo-responsive polymers with similar molecular weights, implying the presence of electrochemically inactive PT groups in the copolymers having longer thermo-responsive segments.     

The flow of a variable viscosity fluid between parallel plates with shear heating

A model for the flow of a fluid through a channel with parallel plates is investigated. The channel is narrow, so that the lubrication approximation may be applied. The channel walls are maintained at a constant temperature. Shear heating effects are included and the fluid viscosity decreases exponentially with temperature. When the flow is driven solely by shear stress or imposed velocity at the top, analytical progress is possible. When pressure gradient also drives the flow the problem is solved numerically.     

Microwave Activation of Processes in Mesopores: The Thiourea Electrooxidation at Mesoporous Platinum

In situ microwave activation is applied to the electrochemical oxidation of thiourea at low surface area (polished polycrystalline) and at high surface area (electrodeposited mesoporous platinum coated) platinum microelectrodes. The one electron oxidation of thiourea to formamidine disulfide is monitored as a function of the different activation parameters. In the absence of microwaves (ambient temperature, low mass transport) increasing the surface area (roughness) increases the thiourea oxidation response predominantly due to adsorption effects. In the presence of high microwave intensities, high mass transport and thermal effects further increase the oxidation current at mesoporous platinum. The most effective thickness of the mesoporous platinum film for the thiourea oxidation process is estimated as 3 μm independent of electrode diameter, temperature, or mass transport effects.